Auto Tools
-
Power Steering Pump Pulley Kit
Item No.:BT4042
*A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles.
*GM 2.3L QUAD 4 four-cylinder engine and Ford 4.6L,5.4L,and 5.8L modular V8 engines.
*Includes the necessary adapter for servicing GM 3.1L,3100,3400 and 3800 V6 Engines.
-
Universal Adjustable Jaw Ball Joint Puller
Item No.:BT9058
5pcs Replaceable Jaw Ball Joint Puller Set, Separator Remover Puller Universal Adjustable
Specification:
* Innovative quick change and simple action for suitable fork
* Enable operator to select correct jaw size without taking entire extractor to the vehicle
* Adjustable opening angle
-
35pcs Master Extractor Set
Item No.:BT1327
35 Pc. Screw Extractor and Drill Bit Set
* Designed to remove broken studs, bolts, socket screws and fittings
* Aggressive left hand spiral design for extra gripping power
* Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor’s grip increases
* Extractor size and recommended drill bit size are etched on each tool
-
Steering Wheel Lock Plate Puller
Item No.:BT1734
*Ideal for detaching steering column lock plates on the majority of cars with air bags
*Dual SAE and metric adapter fits 9/16″ and 14mm
*Works on tilt and telescoping columns
-
Ten Way Slide Hammer Puller Set BT9027B
Item No.:BT9027B
* Ten way slide hammer puller set is a versatile collection of tools used for a wide variety of puller applications. It can be used for flange type axles, oil seals, and other press fit parts. The set includes a 2-way and 3-way yokes that can be set up for either internal or external pulling.
-
5pcs Tie Rod Ball Joint Pitman Arm Tool Kit
Item No.:BT9005
Product Description: This 5pcs Ball Joint Separator kit set is a professional set of tools for cars and light trucks. With this set your efficiency of maintenance will be greatly improved, half the work with double results. Whole set is packed in a solid case , place the tools in order, you will hardly lost tools with this compact case. Tools are designed as tightly connected that will stay stability.5pc tie rod pitman arm separator kit to separate ball joints and tie rods. Three forks with interchangeable shafts for use with regular hammer or air hammer.
-
46pcs Harmonic Balancer Puller Set
Item No.:BT1733
*Multipurpose puller set for extracting flywheels and pulleys.
*Made from drop forged,heat treated steel.
*Contents:
1xCarbon Steel Yoke,1xFlat Shaft Adapter
1xCarbon Steel Pressure screw 3/4″-16TPI
2xSmall and Large Centering Adapters.
3×1-1/2″Bolt 3/8″-24 TPI,3×2″Bolt 3/8″-16 TPI,3×3″Bolt 3/8″-16 TPI,3x90mm Bolt M8 x 1.25mm
2×4-1/2″ Bolt 3/8″-16 TPI,2×6″Bolt 5/16″ -18TPI,3×3-1/2″Bolt 5/6″-24 TPI,2×3″Bolt 5/16″-24TPI,2×2-1/2″Bolt 1/4″-28 TPI,3x35mm Bolt M10 x 1.5mm
3 x 45mm Bolt M8 x1.25mm,2 x 65mm Bolt M8 x 1.25mm
Washers:8mm ID (x6),10mm ID (x4),12mm ID (x4)
-
6pcs Front End Service Tool Kit
Item No.:BT6020
Professional Front End Service Pitman Arm Puller Tool Kit
* This Front End Ball Joint Service Tool Kit is specially designed for easy separation pull removal of ball joint, Front tie rod ends and pitman arm on most popular car models. It perfectly fits most compact cars, mid-size cars and light pickup trucks, BUT not fits most full-size cars, mid-size and full-size pickup trucks.Designed for removal of most of popular types of pitman arms, tie rods, and ball joints on most vehicles.
-
2pc Coil Spring Compressor For MacPherson Struts Shock Absorber
Item No.:BT9113
*Compresses the coil spring to replace the shock absorber unit or spring.Also allows for repairs on bent struts,strut tubes and damaged pieces.
*Forged construction,Acme threded rod,and built-in detent pins to help lock the coil in place.
-
5pcs Heavy Duty Tie Rod End Ball Joint Tool Kit Auto Repair Tool
Item No.:BT2511
APPLICATION: The ball joint separator is used for separating the ball joint from the spindle support arm on front wheel drive vehicles, both domestic and import.
QUALITY: This set comes with a one piece alloy steel construction that ensures durability and strength to withstand the heavy duty hammering force transferred to automotive attachments in your home garage or work.
-
Internal Coil Strut Remover Coil Spring Compressor
Item No.:BT9112
*Made of heat treated steel and drop forged steel hooks
*For repairing and replacing shock absorbers,struts & springs
*24mm hex drive and 1/2″ square drive
*300mm length
-
2pcs Heavy Duty Coil Spring Strut Compressor
Item No.:BT9012
*Great ideal for remove and install coil spring & strut
*Compatible for most cars and trucks
*Strong steel jaw hooks onto coils securely
*Heat treated screws
*Tool lenth:12″
*Max Opening is 10″ 254mm